Belfast Renovation, Ardenlee Avenue

Project details
Renovation and two-storey extension
105 m² to 132 m² | Three bedrooms, two bathrooms
Ardenlee Avenue, Belfast
Under construction
IMAC Architecture | LMB Engineers
Full architecture, interiors and garden design
This renovation on Ardenlee Avenue transforms a dated 105 m² Belfast home into a 132 m², three-bedroom house with a more generous open-plan kitchen, dining and snug. A two-storey rear extension and revised internal layout create better flow, with architecture, interiors and the garden developed as one design. When townscape designation and neighbour objections required changes, we reworked the appearance and form while retaining the intended floor area. On site, solid brick walls, damp and failed plaster prompted a breathable insulation strategy and new insulated floors with underfloor heating. The project is currently under construction.
“On a current project in particular, he has gone above and beyond to help with planning regulations, design changes, and even interior design advice.”Kim Lowry | Google review
A young couple chose a house on Ardenlee Avenue, Belfast, for its location and potential to extend into the garden. The existing 105 m² property had a very small kitchen, dated interiors, damp and disconnected rooms. They wanted more living space, a contemporary feel and a practical home for everyday life.
The brief called for an open-plan kitchen, dining and snug, three bedrooms and two bathrooms, with better links to the garden and improved circulation throughout.
We designed a two-storey rear extension and reconfigured internal walls, increasing the home to approximately 132 m². The original contemporary concept had to evolve when the area was designated an Area of Townscape Character and neighbours raised concerns about building scale and daylight. We revised the form and adopted more traditional finishes to respond to the setting, while retaining the proposed floor area. Discreet rooflights bring daylight into the enlarged rooms without dominating the external appearance.
The architectural changes were developed alongside the interior and garden designs. At the rear, raised external levels create level thresholds and a closer connection between the open-plan spaces and the garden.
Construction revealed solid brick walls without cavity insulation, failed plaster and damp beneath the hallway floor. We specified breathable insulating materials and used the floor works to incorporate insulation and underfloor heating throughout the ground floor. Sourcing brick to match the original imperial-sized units also caused delays. With work under way, the scheme shows how joined-up design can respond to planning conditions and unexpected defects while protecting the clients’ original priorities.



Other projects to explore
Seen a project that gives you ideas?



